Oil Tanks We Supply
We supply and install quality plastic heating oil tanks suitable for domestic use across Leinster.
All tanks meet current standards and are selected based on safety, available space and required capacity.
Tank Types
Choosing the Right Oil Tank
In some locations a bunded tank is recommended or required.
In others, a single skin tank may be suitable.
In others, a single skin tank may be suitable.
The tank type depends on factors such as tank location, surrounding area, access and the conditions on site.
Typical guide distances:
- within 10 metres of water or drainage
- within 50 metres of a drinking water source
Suitable where:
- installation position meets safety distances
- lower cost option is preferred
- base is stable and level
Typical sizes supplied:
- 650 litre oil tank
- 1000 litre oil tank
- 1200 litre oil tank
- 1350 litre oil tank
- 1400 litre oil tank
- 2000 litre oil tank
- 2500 litre oil tank
Single skin tanks are a straightforward and cost-effective solution where site conditions allow.
Capacity Options
Single Skin Oil Tanks
Environmental risk
A single skin tank should not be installed where a leak could reach:
A single skin tank should not be installed where a leak could reach:
- a drain or gully
- a river, stream or ditch
- a soakaway or septic system
- a well or borehole
- sloping ground where oil could run off
Over 2500 litres
For domestic installations above 2500 litres, secondary containment is required.
For domestic installations above 2500 litres, secondary containment is required.
A bunded tank is required or strongly recommended in these cases:
Bunded Oil Tanks (double layer)
- available space
- oil usage
- base condition
- distance to boundaries or drains
- environmental requirements
The correct tank depends on:
We mainly supply Carbery plastic tanks, widely used in Ireland for reliability and long service life.
Tanks Available
Single skin tanks
Compact solution for smaller households or limited space.
Popular.
Most poular.
Bunded Tanks
Compact solution for smaller households or limited space.
Popular size for average domestic heating use.
Tank Base Requirements
We can repair or prepare a new base if required.
If the base is too small or uneven, it can cause deformation and shorten the tank life.
- be level
- support the weight of the tank when full
- extend fully under the tank footprint
- be stable and solid
Installation Included
Old tank removal can be arranged if needed.
- positioning the tank
- connection to fuel line
- checking fittings
- system test
- advice on use and maintenance
Installation normally includes:
The base must:
Send a photo of the current tank and location.
We can confirm suitable size and type.
We can confirm suitable size and type.
Unsure Which Tank You Need
086 806 8776
Recent works
Check out our recent works to see the quality we deliver. Discover how we've expertly handled projects just like yours.